Deco Truss Company Inc

Many Companies claim to have The Best Truss; however are they really being honest with you and working in your best interest.

Here are 5 simple questions you should ask, when you request a Truss Quote. If you don’t get these questions answered upfront, you may find yourself facing change orders and problems down the road.

1. Will all the pages of The Architecture/Engineering Plans you provided for the Bid, be shown on the Contract/Proposal? This insures you are getting a Hard Number for what the Architect and/or Engineer designed or intended.
2. Will Special Conditions, Loadings, Wind Loads and Building Code be shown on your contract/proposal?
3. Will you be provided with a Preliminary Plan prior to Sealed Plans and Engineering’s?
4. Will you be provided with Final Truss Plans and Truss Engineering’s for approval prior to fabrication?
5. Will you accept changes made to your Architect or Engineer’s Plans? Consequently this will cost you money to have your plans revised and re-submitted to the Building Department. If No, than never, ever accept a contract/proposal that states your truss are bid,  per the truss company’s layout; make sure bid is based on the Architect/Structural plans provided.

Deco Truss Company has been in Business in 1983, Same Owners & Same Company Name.  We are one of the few that can claim this because we do it right and do not play games, with our clients.  We can guaranty that the above 5 simple questions, will always be followed by Deco Truss.

Deco Truss Company Inc is the most reliable and trusted source exporting trusses to the Caribbean. Weekly we load 2-3 Flat Racks of Trusses and Building Materials.

Steps to Export Truss Order:

1. Customer: Execute Contract, Sign Contract and send Deposit as Required
2. Deco: with-in 1 week you will receive a preliminary plan.  Preliminary Plan will be provided to you via e-mail, so that you can review and make any necessary changes prior to engineering.
3. Customer: Approve, with any necessary changes Preliminary Plan sign and send back.  
4. Deco: Once we receive Preliminary Plans Back we will proceed to Final Plans and Engineering and make any changes necessary per Preliminary Plan.
5. Deco: Once Final Plans and Engineering’s are complete and signed and sealed by our Engineer, a copy will be e-mailed to you and originals will be sent via mail, per your instructions, if you would like them sent via Fed-Ex, this will be charged to you or you can provide your Fed-Ex number
6. Customer: Verify Final Plans and Engineering and approve 1 plan at both indicated areas and return to Deco Truss, plan must be signed by person who signed contract or authorized signer for company. Also insure final balance owed has been wired.
7. Deco: Once we receive final Truss Plan approved and final balance owed can proceed to production
8. Deco: Upon Trusses being complete our office will contact you via phone or e-mail you so that you can arrange your shipper to live load here at our facility at said time we will let you know how many 40’ flat racks you will need.

Check out our lastest E-News Letter – Big News We Turn 30 Next year

http://myemail.constantcontact.com/Your-Truss-Company-and-Lumber-Yard.html?soid=1101939834807&aid=rdG_9DuIKyk.

Deco Truss Company, South Florida, Miami, Key Largo and The Caribbean’s Lumber Yard is now Stocking Telephone Poles/ Piles/Pilings.  This are used for Building Pole Barns, Docks, Hanging Lights etc..  Check out our lastest e-newletter link below for sizes and prices.

http://myemail.constantcontact.com/Poles—Piles-In-Stock.html?soid=1101939834807&aid=vr2vNk6jJrg.

BASF today announced that closed-cell spray polyurethane foam products have received hurricane-zone approval from the Miami-Dade County Building and Neighborhood Compliance (BNC) Department. Tests and engineering evaluations of COMFORT FOAM® and SPRAYTITE® (178 series) applied at roofing trusses increased the wind-uplift resistance of a traditional code-approved home roof by more than 200 percent. Spray Polyurethane Foam (SPF) from BASF can enhance wind-uplift resistance of new and existing homes to help prevent roof failure during a hurricane.*

Read The Entire Article – Click Here

http://myemail.constantcontact.com/Miami-Dade–FL–Approves-Foam-for-Hurricane-Zone-Use.html?soid=1101939834807&aid=t-CUhpPI9-c.

Deco Truss Company is South Florida’s Largest Supplier of USP Connectors Customers and Other Lumber Yards send Clients to Deco Truss, because of of Large Inventory and The Ability to get Products in with 1-2 Business Days.

Take a Look at USP Connector Catalog On Line

http://myemail.constantcontact.com/Buy-Direct—Building-Supplies—Tools–Generators—We-Export.html?soid=1101939834807&aid=qGFxDGlTPII.

Choosing The Right Supplier for your Building Materials needs abroad, is the most important step in insuring you will get the best prices and the correct items.

There are many choices out there, but deciding to use a Real Stocking Lumber Yard and not someone in an office building, will insure you are dealing with the “Real Deal”.

At Deco Truss Company Inc, we inspect every item our clients buy before it leaves aboard.  we can do this, because, we have the facility to Stock Items and Load Flat Racks and/or Containers Here.

Check Out our Facility:

We are not in an Office Building, we are located on 8-1/2 Acres at 13980 SW 252 Street, Miami, Fl 33032.  Ready to serve your Export Needs.

Need a Power Saw to Cut Conrete and/or Rebar.  You can do it with this Bad Boy from Makita.

Buying Doors (Entry or Interior) may sound easy, but when you start looking at the many choices, making a decision can get very complex.

#1 Question, when visiting a Lumber Yard or Door Company  – is to find out were their doors come from.

At Deco Truss we only deal with U.S. Based Companies who can back up their products/doors.  A lot of companies out there promises lower prices, but when you find out their doors are imported from abroad, you better find-out what the Written Warranty is.  we have found out that companies abroad do not Kiln Dry the lumber used in their doors, which causes warping and cracking once you install it and it is exposed to humidity and weather conditions here in South Florida.

Call Deco Truss at 305-257-1910, E-Mail Deco Truss at sales@decotruss.com or visit or Web Site for more information on Quality Doors – Deco Door web Site Page