Truss Manufacturing

At Deco we take pride in our work, we believe that customer satisfaction is our # 1 goal. When we manufacture a set of trusses for a job site, you can be assured that you will receive a pre-manufactured truss system that will cost you less to install than those of out competitors.

Examples:

  • We list all pages of plans provided for quote on our proposal/contract
  • All Jacks are cut left or right, not Double 45- this allows a better and cleaner fit
  • All truss over 40′-0″ are a min. of 2×6 top cord.
  • All Girder Trusses are a min. of 2×6 bottom cord.
  • No Piggyback Trusses, unless trusses exceed 12′-0″ in height
  • All trusses on Placement Plan are labeled by section.
  • All jobs are provided with a preliminary plan prior to sealed drawings
  • We provide 3-sealed layouts & 1- copy, 2 sets of sealed engineering’s & 1-copy, per job.
  • Sealed Engineering’s & Layouts provided prior to fabrication of trusses for your approval.

 

We do pressure treated trusses.
Click Below for more info
Bor-A-Guard

 Mitek – Roof and Floor Truss Manual

 MiTek – The World of Roof Technology

No one can match our service or quality. That is how we have been successful in business since 1983.

We look forward to serving you in the future!