Truss Manufacturing
At
Deco we take pride in our work, we believe that customer satisfaction
is our # 1 goal. When we manufacture a set of trusses for a job site,
you can be assured that you will receive a pre-manufactured truss system
that will cost you less to install than those of out competitors.
Examples:
- We list all pages of plans provided for quote on our proposal/contract
- All Jacks are cut left or right, not Double 45- this allows a better
and cleaner fit
- All truss over 40'-0" are a min. of 2x6 top cord.
- All Girder Trusses are a min. of 2x6 bottom cord.
- No Piggyback Trusses, unless trusses exceed 12'-0" in height
- All trusses on Placement Plan are labeled by section.
- All jobs are provided with a preliminary plan prior to sealed drawings
- We provide 3-sealed layouts & 1- copy, 2 sets of sealed engineering’s & 1-copy,
per job.
- Sealed Engineering’s & Layouts provided prior to fabrication
of trusses for your approval.
We
do pressure treated trusses.
Click Below for more info
|
 Mitek - Roof and Floor Truss Manual
Mitek - The World of Roof Technology
No one can match our service or quality. That is how
we have been successful in business since 1983.
We look forward to serving you in the future!
|
